Illuminatore Archon foto video sub 5200 lumen W42VR

Archon W42VR Diving Light

OPERATING INSTRUCTIONS

PRODUCT SPECIFICATIONS:

◆ Model: W42VR multifunction underwater photographing Light

◆ Bulb: White CREE XM-L2 U2 LED *8 (max 5200 Lumens);

Red CREE XP-E N3 LED*4 wavelength 620 nm (max 400 Lumens);

Purple LED *2 wavelength 410nm (max 6W);

UV LED*2 wavelength 365nm (max 6W);

◆ Switch 1: Red> Purple> UV> off

Switch 2: White high> White medium >White low> off

The two switches can be operated separately or simultaneously.

◆ Runtime: White High Mode: 1.5H; White Medium Mode: 3.0H; White

Low Mode: 4.0H Red Light: 4.0H; Purple Light: 5.0H; UV light: 5.0H

◆ Color temperature: 5000K (white light)

◆ Reflector: No hotspot design, no reflector;

◆ Lens: 4mm Polycarbonate Board;

◆ Body material: Durable aircraft-grade aluminum;

◆ Angle of light beam: 120°

◆ Surface treatment: Premium Type III hard-anodizing.

◆ Color: Black

◆ Battery: 18650 rechargeable Li- ion battery *4;

◆ Battery Indicator: 100%-50%: Green; 50%-30%: Yellow; 30%-10%:

Red; Below 10%: Red Flashing; Below 5%: switch off;

◆ With battery over-discharging protection, polarity reversing

protection

◆ with gas release valve

◆ Operation voltage: 2.8V to 4.2V;

◆ Waterproof: 100 meters underwater

◆ Dimensions: 140.9mm (length)* 62.6mm (dia. of head);

◆ Weight: 490 grams (without battery); 682.4 grams (with battery)

◆ Underwater Weight: 330 grams (with battery)

◆ Impact resistance: 1.5M.

 

BATTERY INSTALLATION

 

1. Remove the tail by turning counter-clockwise.

 

2. Remove used batteries and replace with fresh batteries as shown by

 

the polarity stickers.

 

3. Mount the tail by turning clockwise.

 

BATTERY CHARGING

 

1. Plug the charger in the wall power socket, the indicator light is green

 

in the free-load status.

 

2. Put the battery in the slot of the charger.

 

3. The indicator light is red if the battery is not fully charged; it will turn

 

green after fully charged.

 

4. Take out the fully charged battery and use them in the diving light.

 

ON/OFF

 

Push the button switch to turn it ON.

 

MODES CHANGING

 

1. Successive push the switch 1 ON-OFF within two seconds to cycle

 

through Red, Purple, UV Light, OFF;

 

2. Successive push the switch 2 ON-OFF within two seconds to cycle

 

through High, Medium, Low (white light), OFF.

 

SCUBA DIVING APPLICATION

 

Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.

 

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

 

CAUTION

 

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.

 

 

If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.

 

WARRANTY RETURN POLICY

 

Please contact your local distributor or retailer for information on how to handle your warranty items.

 

REPLACEMENT PARTS

 

CAT# DESCRIPTION

 

D368 O-ring

 

D369 Lens